home    advanced search    registration    shopping cart    sign in    contact CSV      admin    



Category
Title
 
Advanced Search - Click here to refine your search


Items found: 24 
 

Search Results
TITLE Click below TITLE link or IMAGE to place product in your shoppingcart,
Registeration is REQUIRED to proceed


Ci9000 



manufacturer KEF 
Price $ POA 
Category Speakers In Wall 
IMAGE 
Notes on ProductCi9000ACE The in-wall Ci Series 9000ACE from KEF is a innovative new advance into custom installed loudspeakers. The 165mm (61⁄2") Uni-Q® driver array brings out the full emotional depth and texture of vocals, whether sung, shouted, spoken or whispered - hardly surprising, since it's exactly the same unit as you'll find on the XQ series. On either side, a matching pair of long throw bass drivers with ultra-low distortion motors for low frequency response that's as lucid as it is gutsy - and thanks to KEF's Acoustic Compliance Enhancement technology, (ACE) what you actually hear is a level of bass extension that's normally only obtainable with much larger speakers. Ci Series 9000ACE comes with two grille options: The pictured black cloth covered grille and a white overhanging grille. A grille for painting or covering is also available. The new Ci Series 9000ACE. More range, more depth. More alive. Ci9000ACE Features and Benefits Purpose built for flush mounting into walls, the 3-way, Ci9000ACE combines 150W power handling and 88dB sensitivity. A 165mm (61⁄2”) polypropylene cone midrange unit with a coincident mounted, twin neodymium magnet, 19mm (3⁄4”) aluminium dome, high-frequency unit and two 165mm (61⁄2”) bass drivers in a sealed back-box. HF output can be increased through alternative terminal connection to compensate for grille coverings.  
 
TITLE Click below TITLE link or IMAGE to place product in your shoppingcart,
Registeration is REQUIRED to proceed


CiFDT 



manufacturer KEF 
Price $ POA 
Category Speakers In Wall 
IMAGE 
Notes on ProductCiFDT A motorised dipole surround sound speaker, the CiFDT combines genuinely unobtrusive installation with the ability to create stunningly realistic background effects. Lying flush with the wall when not in use, a sophisticated flat panel driver moves into position when switched on, radiating higher frequencies equally front and back to diffuse the sound evenly throughout the room, while low frequency effects are being faithfully reproduced by the integral 130mm (5”) bass driver. Acoustically, the two technologies complement each other perfectly to generate a richly detailed ambient soundfield; aesthetically, the appearance couldn’t be more discreet. As an architectural audio solution, it’s imaginative, impeccably engineered and incredibly satisfying. CiFDT Features and Benefits Purpose built for flush mounting into walls, the CiFDT combines 100W power handling and 86dB sensitivity. A 110mm x 180mm (41⁄2” x 7”) Flat panel with a 130mm (5”) bass driver. Will require an additional 12 volt supply. The bezel and grille can be painted or covered by fabric to match the interior décor.  
 
TITLE Click below TITLE link or IMAGE to place product in your shoppingcart,
Registeration is REQUIRED to proceed


CWM Cinema 



manufacturer B&W 
Price $ POA 
Category Speakers In Wall 
IMAGE 
Notes on ProductThe CWM Cinema is the ultimate home-cinema wall-mount speaker. The speaker has a unique 2-position tilt axis switch for optimum directional sound. The frame incorporates "Swing Out Dog" for effortless installation. Two Kevlar coned mid/bass drive units ensure powerful reproduction of even the most demanding of movie soundtracks. Description 2-way magnetically shielded in-wall system Dimensions Height: 255mm (10 in) Width: 371mm (14.6 in) Depth: 85mm (3.3 in) from wall surface Net Weight 3.7kg (8.2 lb) Freq. Response 55Hz - 20kHz ± 3dB on reference axis Sensitivity 91dB spl (2.83V 1m) Normal Impedance 8 ohms Power Handling 20 - 150W into 8 ohms on unclipped programme Drive Units Unit 1: 2x 135mm (5.3 in) Kevlar® cone bass/midrange Unit 2: 1x 25mm (1 in) metal dome high frequency Unit 3: Finish Semi-matt white suitable for customising or pre-painting Crossover Frequency 3.5kHz Cut-out size (without pre-mount) Height: 220mm (8.7 in) Width: 337mm (13.3 in) Cut-out size (with pre-mount) Height: 226mm (8.9 in) Width: 343mm (13.5 in)  
 
TITLE Click below TITLE link or IMAGE to place product in your shoppingcart,
Registeration is REQUIRED to proceed


CWM DS8 



manufacturer B&W 
Price $ POA 
Category Speakers In Wall 
IMAGE 
Notes on ProductRoom acoustics, programme material and personal preference all influence the choice between dipole and conventional surround speakers so the decision is sometimes a compromise. The CWM DS8 puts an end to compromise by providing both options at the push of a remote control handset button. The CWM DS8 achieves its versatility by incorporating two midrange and tweeter driver arrays with a shared bass driver. In conventional mode the system is configured in 2-way format with a 180mm Kevlar® bass/midrange driver and 25mm Nautilus™ tube loaded aluminium dome tweeter. In dipole mode the system is configured in dual 3-way format with two separate 80mm Kevlar® midrange and 25mm Nautilus™ tube loaded aluminium dome tweeter arrays sharing the same bass driver. The dipole midrange/tweeter arrays are aligned at 90° to each other and connected in reverse phase to create a radiation null on axis and a diffuse sound field. In either dispersion mode the inherent quality and performance of CWM DS8 drivers shines through. It provides surround channel perfomance that matches perfectly that of the identically dimensioned CWM8180 three-way in-wall speaker. The CWM DS8 mounting frame incorporates simple and effective swing out dog fixings and requires a cut-out only 255mm wide. An optional back box improves sound insulation between adjoining rooms and defines the drivers’ working volumes. Selection of conventional and dipole operation is made via a 12V trigger input Description 3-way dipole /2-way monopole in-wall system Dimensions Height: 524mm (20.6 in) Width: 294mm (11.6 in) Depth: 87mm (3.4 in) Net Weight 5.7 Kg (12.5lb) Freq. Range 40Hz and 50KHz (monopole) 40Hz and 18Hz (dipole) Sensitivity 88dB Normal Impedance 8 ohms Power Handling 150W Drive Units Unit 1: 180mm (7 in) Kevlar cone bass/midrange Unit 2: 2x80mm (3 in) Kevlar cone midrange Unit 3: 3x25mm (1 in) Nautilus tube loaded aluminium dome tweeter Finish Satin white suitable for customising or pre-painting Cut-out size (without pre-mount) Height: 485mm (19.1 in) Width: 255mm (10 in)  
 
TITLE Click below TITLE link or IMAGE to place product in your shoppingcart,
Registeration is REQUIRED to proceed


CWM LCR 7 



manufacturer B&W 
Price $ POA 
Category Speakers In Wall 
IMAGE 
Notes on ProductTrue 3-way in-wall speakers like the CWM LCR7 are unusual, but we have never been afraid of the unconventional if such means justify the ends and considering the performance to be found here, there’s absolutely no doubt they do. Featuring cutting-edge B&W technology throughout the frequency range, the LCR7 features twin 100mm (4 in) mica cone bass drivers, a 100mm (4 in) woven Kevlar® cone midrange driver and a Nautilus™ tube-loaded 25mm (1 in) aluminium dome tweeter. The sound of the CWM LCR7 communicates every audio nuance from low bass to extreme treble and from whispering quiet to sound levels equivalent to live music. The mica bass drivers provide the low frequency snap characteristic of any really good loudspeaker, the Kevlar® midrange driver sounds both warm and clear, and the Nautilus™ inspired tweeter combines fine detail with relaxed neutrality. The CWM LCR7 mounting frame incorporates simple and effective swing out dog fixings and at only 175mm wide the speaker can bring its sound quality to the tightest in-wall locations. An optional back box for the LCR7 improves sound insulation between adjoining rooms and defines the bass drivers’ working volume.Description 3-way in-wall system Dimensions Height: 625mm (24.6 in) Width: 175mm (6.9 in) Depth: 97mm (3.8 in) behind surface Net Weight 4.2kg (9.3 lb) Freq. Response 65Hz - 22kHz Freq. Range 54Hz and 30kHz Sensitivity 85dB Normal Impedance 8 ohms (minimum 3.6 ohms) Power Handling 150W into 8 ohms on unclipped programme Drive Units Unit 1: 3x 100mm (4 in ) mica cone bass Unit 2: 100mm (4 in) Kevlar cone midrange Unit 3: 25mm (1 in) Nautilus tube loaded aluminium dome tweeter Finish Semi-matt white suitable for customising or pre-painting Crossover Frequency 300Hz, 3.2kHz Cut-out size Height: 600mm (23.6 in) Width: 150mm (5.9 in)  
 
TITLE Click below TITLE link or IMAGE to place product in your shoppingcart,
Registeration is REQUIRED to proceed


CWM LCR 8 



manufacturer B&W 
Price $ POA 
Category Speakers In Wall 
IMAGE 
Notes on ProductThe CWM LCR8 is a 2½-way in-wall speaker incorporating twin 130mm (5 in) aluminium cone bass drivers, twin 130mm (5 in) woven Kevlar® cone bass/midrange drivers, and a Nautilus™ tube loaded 25mm (1 in) aluminium dome tweeter in a symmetrical array less than 220mm (8.7 in) wide. Technology of this sophistication is rare in an in-wall speaker. It achieves a -6dB bandwidth stretching from 35Hz to 50kHz and can generate sound levels equivalent to the largest scale live music or theatre performance. The raw facts, however, can never do justice to its sound. Description 2½-way in-wall system Dimensions Height: 708mm (27.9 in) Width: 219m (8.6 in) Depth: 89.2mm (3.5 in) behind surface Net Weight 8.0kg (17.6 lb) Freq. Response 45Hz – 22kHz Freq. Range 35Hz and 50kHz Sensitivity 91dB Normal Impedance 8 ohms (minimum 4.5 ohms) Power Handling 150W into 8 ohms on unclipped programme Drive Units Unit 1: 2x 130mm (5 in ) paper/Kevlar cone bass Unit 2: 2x 130mm (5 in) Kevlar cone bass/midrange Unit 3: 25mm (1 in) Nautilus tube loaded aluminium dome tweeter Finish Semi-matt white suitable for customising or pre-painting Crossover Frequency 300Hz, 3.5kHz Cut-out size Height: 668mm (26.3 in) Width: 180mm (7.1 in)  
 
TITLE Click below TITLE link or IMAGE to place product in your shoppingcart,
Registeration is REQUIRED to proceed


CWM500 



manufacturer B&W 
Price $ POA 
Category Speakers In Wall 
IMAGE 
Notes on ProductThe CWM 500 has been designed for medium to small home applications. The tweeter is an ultra-12 tweeter with low diffraction effect protection. The tweeter has a treble contour switch to cut or boost the high frequency. The frame incorporates "Swing Out Dog" for effortless installation. IR Receiver compatible.Dimensions Height: 228mm (9 in) Width: 175mm (6.9 in) Depth: 85mm (3.3 in) from wall surface Freq. Response 55Hz - 20kHz ± 3dB on reference axis Sensitivity 88dB spl (2.83V 1m) Normal Impedance 8 ohms Power Handling 20 - 100W into 8 ohms on unclipped programme Drive Units Unit 1: 1x 125mm (5 in) Kevlar® cone bass/midrange Unit 2: 1x 25mm (1 in) high frequency Unit 3: Finish Semi-matt white suitable for customising or pre-painting Crossover Frequency 3.5Khz Cut-out size (without pre-mount) Height: 212mm (8.3 in) Width: 156mm (6.1 in) Cut-out size (with pre-mount) Height: 217mm (8.5 in) Width: 161mm (6.3 in)  
 
TITLE Click below TITLE link or IMAGE to place product in your shoppingcart,
Registeration is REQUIRED to proceed


CWM6160 



manufacturer B&W 
Price $ POA 
Category Speakers In Wall 
IMAGE 
Notes on ProductThe CWM 6160 in-wall speaker is simplicity itself to install and, thanks to its B&W know-how and heritage, reaches a level of performance that will both surprise and delight. CWM 6160 is a 2-way design featuring a 165mm (6½ in) woven glass fibre cone bass/midrange driver and an Ultra-12 tweeter in a neat rectangular chassis, incorporating quick and easy swing-out dog fixings. CWM 6160 is a perfect speaker for those indulgent extra locations - the bathroom, the kitchen - that define the real luxury of custom installed audioDescription 2-way in-wall system Dimensions Height: 310mm (12.2 in) Width: 216mm (8.5 in) Depth: 89mm (3.5 in) behind surface Net Weight 2.1kg (4.7 lb) Freq. Response 50Hz - 20kHz Freq. Range 40Hz and 22kHz Sensitivity 89dB Normal Impedance 8 ohms (minimum 3.6 ohms) Power Handling 130W into 8 ohms on unclipped programme Drive Units Unit 1: 165mm (6.5 in ) glassfibre cone bass/midrange Unit 2: 25mm (1 in) Ultra 12 tweeter Unit 3: Finish Semi-matt white suitable for customising or pre-painting Crossover Frequency 3.2kHz Cut-out size Height: 281mm (11.1 in) Width: 186mm (7.3 in)  
 
TITLE Click below TITLE link or IMAGE to place product in your shoppingcart,
Registeration is REQUIRED to proceed


CWM6260 



manufacturer B&W 
Price $ POA 
Category Speakers In Wall 
IMAGE 
Notes on ProductThe CWM 6260 is an in-wall speaker distinguished by its adjustable level 25mm (1 in) soft dome tweeter. It brings smoother and more detailed high frequency performance to a package that also includes a woven glass fibre 165mm (6½ in) bass/midrange driver and three-position switchable high frequency equalisation. Installation simplicity is catered for by a simple and effective integrated swing out dog fixing chassis. The CWM 6260 is an elegantly engineered and cost effective route to high quality in-wall sound. Description 2-way in-wall system Dimensions Height: 310mm (12.2 in) Width: 216mm (8.5 in) Depth: 93mm (3.7 in) behind surface Net Weight 1.6kg (3.5 lb) Freq. Response 50Hz - 22kHz Freq. Range 40Hz and 30kHz Sensitivity 89dB Normal Impedance 8 ohms (minimum 3.6 ohms) Power Handling 130W into 8 ohms on unclipped programme Drive Units Unit 1: 165mm (6.5 in ) glassfibre cone bass/midrange Unit 2: 25mm (1 in) textile dome tweeter Unit 3: Finish Semi-matt white suitable for customising or pre-painting Crossover Frequency 3.2kHz Cut-out size Height: 281mm (11.1 in) Width: 186mm (7.3 in)  
 
TITLE Click below TITLE link or IMAGE to place product in your shoppingcart,
Registeration is REQUIRED to proceed


CWM650 



manufacturer B&W 
Price $ POA 
Category Speakers In Wall 
IMAGE 
Notes on ProductThe CWM 650 has been designed for large or small home applications. The tweeter is a 1in metal dome tweeter and the CWM650 features a treble contour switch to cut or boost the high frequency The frame incorporates "Swing Out Dogs" for effortless installation. IR Receiver compatible.Dimensions Height: 309mm (12.2 in) Width: 216mm (8.5 in) Depth: 85mm (3.3in) from wall surface Freq. Response 50Hz - 20kHz ± 3dB on reference axis Sensitivity 89dB spl (2.83V 1m) Normal Impedance 8 ohms Power Handling 20 - 130W into 8 ohms on unclipped programme Drive Units Unit 1: 1x 165mm (6.5 in) Kevlar® cone bass/midrange Unit 2: 1x 25mm (1 in) metal dome high frequency Unit 3: Finish Semi-matt white suitable for customising or pre-painting Crossover Frequency 3.5Khz Cut-out size (without pre-mount) Height: 281mm (11.1 in) Width: 186mm (7.3 in) Cut-out size (with pre-mount) Height: 289mm (11.4 in) Width: 193mm (7.6 in)  
 
[ 2 ]

Home    Advanced Search    Registration    Shopping Cart    Sign In    Administration    contact csv