home    advanced search    registration    shopping cart    sign in    contact CSV      admin    



Category
Title
 
Advanced Search - Click here to refine your search


Items found: 16 
 

Search Results
TITLE Click below TITLE link or IMAGE to place product in your shoppingcart,
Registeration is REQUIRED to proceed


AS1 



manufacturer B&W 
Price $ POA 
Category Subwoofers 
IMAGE 
Notes on ProductThe AS1 subwoofer is specifically designed to complement the LM1 and VM1 and features an 85 watt amplifier and 6½ inch driver with magnetic shielding. The integral Flowport ensures clean bass with good attack. Versatile in use, the amplifier accommodates both speaker level and line level inputs. A 2-position Music/Movie mode switch modifies the subwoofers output to fit the demands of each type of material. The control panel is easily accessible from the top of the unit rather than being hidden at the rear. Description Active vented-box subwoofer system Dimensions Height: 378mm (14.9 in) Width: 215mm (8.5 in) Depth: 385mm (15.2 in) Net Weight 11kg / 24.2 lb Freq. Response -3dB 31Hz (Music mode) / 34Hz(Movie mode) - 75Hz Freq. Range -6dB at 27Hz and 100Hz Drive Units Unit 1: 1x 165mm (6.5 in) dia paper cone Unit 2: Unit 3: Finish Black Ash vinyl cabinet with black grille Silver vinyl cabinet with grey grille Sub Woofer Amplifier Description: Class B Power Output: 85W continuous Rated Power Consumption: 120W Input Impedance: 100k ohms Signal Noise: 94dB Functions: Volume level - Bass roll-off alignment Inputs: Line In (RCA Phono) Speaker level In (spring clips) Outputs: Line Out (RCA Phono, high-passed) Speaker level Out (spring clips, high-passed) Bowers & Wilkins 2002  
 
TITLE Click below TITLE link or IMAGE to place product in your shoppingcart,
Registeration is REQUIRED to proceed


AS2 



manufacturer B&W 
Price $ POA 
Category Subwoofers 
IMAGE 
Notes on ProductThe AS2 features a 250mm (10 in) Mica cone driver, the extreme stiffness of which is able to withstand the considerable forces generated by dynamic bass signals. The integral 150W amplifier, features our Bass Overload Suppression System circuitry to avoid the annoying distortion effects that might normally occur should some unexpectedly loud signal threaten to overload the subwoofer. The AS2 can accept both line level and speaker level inputs and has a choice of equalisation, enabling the response to be tailored to your room. Description Active closed-box subwoofer system Dimensions Height: 325mm (12.8 in) Width: 325mm (12.8 in) Depth: 393mm (15.5 in) including grille and controls Net Weight 15.5kg (34 lb) Freq. Response ±3dB 32Hz – 125Hz adjustable (EQ at i) Freq. Range -6dB at 20Hz and 140Hz adjustable (EQ at i) Drive Units Unit 1: 250mm (10 in) dia with mica cone Unit 2: Unit 3: Finish Cabinet: Black or silver Grille: Black or silver cloth Sub Woofer Amplifier Description: Class-B Power Output: 150W Rated power consumption 220W Input Impedance: 22kohms Signal Noise: >90dB Functions: Volume level Low-pass filter frequency Low-pass filter bypass Bass roll-off alignment Phase switch Auto sense on/standby Inputs: Line In (RCA Phono) Speaker level (binding posts) Outputs: Link Out (RCA Phono, parallel to Line In) Low Pass Filter Active 2nd-order, variable cut-off frequency  
 
TITLE Click below TITLE link or IMAGE to place product in your shoppingcart,
Registeration is REQUIRED to proceed


D1500 Subwoofer 



manufacturer Meridian 
Price $ POA 
Category Subwoofers 
IMAGE 
Notes on ProductMeridian D1500 Digital Active Subwoofer The Meridian D1500 is the worlds First Digital Active Subwoofer. Like all Meridian subwoofers the D1500 emphasises extreme bass depth, clarity, control, articulation, slam and attack. It employs 96kHz/ 24bit digital to analogue conversion and accepts digital inputs up to 96kHz including those carrying MHR signals. Separate analogue and digital power supplies are used to feed the D1500’s precision electronic circuits ensuring that both high and low power sections receive continually smooth supply. Product/D1500 Active Subwoofer Fully shielded for use close to monitors and televisions Meridian subwoofers are constructed from 22mm MDF and are fully braced and damped. They are then finished with a 6mm annealed plate glass top and are supplied with feet and castors so as they can be installed on any floor type. The input and output connectors on the back panel of the D1500 allow it to be easily daisy chained should you require multiple subwoofers. It also features Meridian Comms connections so as when installed in a Meridian Digital Theatre it works seamlessly with other Meridian products. Meridian subwoofers come supplied with an SY5-lead to make Meridian Comms connection easier. The worlds first Digital Active Subwoofer Takes digital inputs up to 96kHz and supports MHR One 100W high-efficiency power amplifier User control over input, sensitivity and crossover frequency Analogue version (M1500) available with line-level balanced & unbalanced inputs Technical Specification Performance: Frequency response within 3dB from 30Hz to 400Hz (Bypass) Switchable 2nd order Butterworth crossover with settings for Flat, DSP5000 compatible or DSP33/ M33 compatible Output >107dB spl @ 1m Noise and Hum <-72dBm Distortion <0.1%, typically less than 0,02% up to full power at all relevant frequencies Inputs: Two cable digital inputs, 75&#937;, up to 96kHz, PCM or MHR encoding Construction: Acoustic-suspension digital active loudspeaker 250mm high-efficiency long-throw custom driver Veneered MDF braced and damped, in black with 6mm annealed plate glass top Supplied with castors and spikes Complementary high-efficiency bipolar design, with output-stage error correction and twin feedback loop 100W mean power continuous Optimised magnetic design Dimensions: Height, Width and Depth 416mm (16.4in). Weight 35kg (77lb)  
 
TITLE Click below TITLE link or IMAGE to place product in your shoppingcart,
Registeration is REQUIRED to proceed


D2500 Subwoofer 



manufacturer Meridian 
Price $ POA 
Category Subwoofers 
IMAGE 
Notes on ProductMeridian D2500 Digital Active Subwoofer The Meridian D2500 is big brother to the D1500 - the worlds First Digital Active Subwoofer. This 200-Watt design uses dual 250mm drivers to provide more of the same extreme deep, clear and controlled bass that the D1500 is known for. It too employs 96kHz/ 24bit digital to analogue conversion and accepts digital inputs up to 96kHz including those carrying MHR signals. Separate analogue and digital power supplies are used to feed the D2500’s precision electronic circuits ensuring that both high and low power sections receive continually smooth supply. Product/D2500 Active Subwoofer Fully shielded for use close to monitors and televisions Meridian subwoofers are constructed from 22mm MDF and are fully braced and damped. They are then finished with a 6mm annealed plate glass top and are supplied with feet and castors so as they can be installed on any floor type. The input and output connectors on the back panel of the D2500 allow it to be easily daisy chained should you require multiple subwoofers. It also features Meridian Comms connections so as when installed in a Meridian Digital Theatre it works seamlessly with other Meridian products. Meridian subwoofers come supplied with an SY5-lead to make Meridian Comms connection easier. Dual driver acoustic-suspension active loudspeaker Takes digital inputs up to 96kHz and supports MHR One 200W high-efficiency power amplifier User control over input, sensitivity and crossover frequency Analogue version (M2500) available has line level balanced & unbalanced inputs Technical Specification Performance: Frequency response within 3dB from 30Hz to 400Hz (Bypass) Switchable 2nd order Butterworth crossover with settings for Flat, DSP5000 compatible or DSP33/ M33 compatible Output >110dB spl @ 1m Noise and Hum <-72dBm Distortion <0.1%, typically less than 0,02% up to full power at all relevant frequencies Inputs: Two cable digital inputs, 75&#937;, up to 96kHz, PCM or MHR encoding Construction: Acoustic-suspension digital active loudspeaker Two 250mm high-efficiency long-throw custom driver Veneered MDF braced and damped, in black with 6mm annealed plate glass top Supplied with castors and spikes Complementary high-efficiency bipolar design, with output-stage error correction and twin feedback loop 200W mean power continuous Optimised magnetic design Dimensions: 788mm (31.1in) W, 416 (16.4) H, 440 (17.3) D without supplied feet or castors. Weight 62kg (137lb)  
 
TITLE Click below TITLE link or IMAGE to place product in your shoppingcart,
Registeration is REQUIRED to proceed


Dominator D-10 



manufacturer Bob Carver 
Price $ POA 
Category Subwoofers 
IMAGE 
Notes on Product 
 
TITLE Click below TITLE link or IMAGE to place product in your shoppingcart,
Registeration is REQUIRED to proceed


Dominator D-12 



manufacturer Bob Carver 
Price $ POA 
Category Subwoofers 
IMAGE 
Notes on Product 
 
TITLE Click below TITLE link or IMAGE to place product in your shoppingcart,
Registeration is REQUIRED to proceed


Dominator D-8 



manufacturer Bob Carver 
Price $ POA 
Category Subwoofers 
IMAGE 
Notes on Product 
 
TITLE Click below TITLE link or IMAGE to place product in your shoppingcart,
Registeration is REQUIRED to proceed


PSW1000 



manufacturer KEF 
Price $ POA 
Category Subwoofers 
IMAGE 
Notes on ProductA 100W on-board amplifier driving a 200mm (8”) bass driver adds a powerful extra dimension to the 3D sound image. A reflex design with carefully contoured ends to the ‘racetrack’ port to eliminate noise and sturdy internal bracing to minimise box colouration, the cabinet’s distinctive soft edged styling is set off by a choice of Black Ash, Maple or Dark Apple finishes. The ideal entry level sub. PSW1000.2 -------------------------------------------------------------------------------- -------------------------------------------------------------------------------- -------------------------------------------------------------------------------- ------------------------------------------------------------ Model PSW 1000 Design Bass reflex, downward firing Drive unit 200 mm (8") Frequency response at 15° horizontally off axis ±3 dB 38 Hz - 180 Hz Crossover frequency variable Amplifiers 100 W built in Maximum output 106 dB Magnetic shielding Yes Weight 13.5 kg (29.7 lbs) Dimensions (H x W x D) 360 x 320 x 320 mm 14.2 x 12.6 x 12.6 in. Finishes Black Ash, Maple or Dark Apple  
 
TITLE Click below TITLE link or IMAGE to place product in your shoppingcart,
Registeration is REQUIRED to proceed


PSW2500 



manufacturer KEF 
Price $ POA 
Category Subwoofers 
IMAGE 
Notes on ProductThe latest addition to the "Q Series" range, the multi-purpose PSW2500 active subwoofer has an attractive curved cabinet which is heavily braced to eliminate any unwanted 'box coloration'. Using a 250mm long-throw bass driver and a 250W built in amplifier; this closed box design will deliver ground-shaking effects and depth, whether it is a movie or music. The PSW2500 also incorporates many new features such as ground lift ability and switchable movie/music modes. The subwoofer will complement any music or multi-channel system, and is available in the same attractive finishes as the rest of the "Q" series range. Model PSW 2500 Design Closed Box Drive unit 250mm (10") ultra long throw bass driver Frequency response at 15° horizontally off axis ±3 dB 33 Hz - 150 Hz Crossover frequency n/a Amplifier requirements 250 W built in Sensitivity (2.83V/1m) 100mV for full Output Maximum output 108 dB Impedance n/a Magnetic shielding Yes Weight 14.5 kg (31.9 lbs) Dimensions (H x W x D) 360 x 495 x 325 mm 14.2 x 19.5 x 12.8 in. Finishes Maple, Dark Apple or Black Ash  
 
TITLE Click below TITLE link or IMAGE to place product in your shoppingcart,
Registeration is REQUIRED to proceed


PSW3500 



manufacturer KEF 
Price $ POA 
Category Subwoofers 
IMAGE 
Notes on ProductWith a 300W power amp driving a 300mm (12”) down-firing long-throw bass unit, PSW3500 is capable of generating a heftily extended bass image over a very large area - and with level, phase, and frequency fully adjustable via infrared remote control, it’s easy to fine tune to your personal preferences and room acoustics. The components and circuitry in the distinctive elliptical cabinet are all of audiophile standard, and a separate infrared sensor allows the unit to be placed completely out of sight. Available in Black Ash, Maple, Dark Apple or Silver. Model PSW 3500 Design Closed box, downward firing Drive unit 300 mm (12") Frequency response at 15° horizontally off axis ±3 dB 30 Hz - 250 Hz Crossover frequency variable/LFE Amplifiers 300 W built in Maximum output 110 dB Magnetic Shielding Yes Weight 22.5 kg (49.6 lbs) Dimensions (H x W x D) 450 x 600 x 395 mm 17.7 x 23.6 x 15.6 in Finishes Black Ash, Maple, Dark Apple or Silver  
 
[ 1 ]

Home    Advanced Search    Registration    Shopping Cart    Sign In    Administration    contact csv